- Heim
- Retro-Auto UGR-T
Retro-Auto UGR-T
3D-Puzzle Retro-Auto UGR-T von Ugears. Faltbares Dach mit Stoffauflage. Keine Batterien. Kein Klebstoff. Das perfekte Geschenk für jedes Alter!
Veškeré zásilky odesíláme ze skladu v Praze
Verfügbarkeit für Abholungen konnte nicht geladen werden
-
337
Bauteile
-
14+
Alter
-
Advanced
Grad
-
Mechanisch
Modell
-
Metallfeder
Antriebsart
-
26.5 x 14.4 x 12.5 cm
Abmessungen
Ugears Retro-Auto UGR-T. Montieren Sie mich. Fahren Sie eine Legende!
Das Retro-Auto UGR-T ist eine weitere elegante Neuheit in der immer größer werdenden Ugears-Kollektion mit historischen und modernen Automobilen, Rennwagen, Motorrädern, Lkw und anderen hervorragenden DIY-Fahrzeugmodellen.
Dieses Modell im Vintage-Stil ist eine Hommage an die Anfänge des Automobilzeitalters.

Um Sie in diese Zeit zurückzuversetzen, hat das Design- und Engineering-Team von Ugears ein ganz besonderes, klassisches Automobil-Modell entworfen. Zu seinen herausragenden Eigenschaften gehören das funktionierende faltbare Dach mit Stoffauflage, nach vorne öffnende verriegelbare Türen, die Motorhaube, die auf beiden Seiten geöffnet werden kann, um den Blick auf einen funktionierenden Vierzylindermotor mit Kurbelwelle freizugeben, ein Pendel, das das Geräusch des Motors imitiert, Vorderräder, die mit dem Lenkrad seitlich bewegt werden können, sowie ein hinten am Wagen montiertes Ersatzrad. Um das Retro-Auto UGR-T in Bewegung zu setzen, müssen Sie zunächst die Start-/Stopp-Taste auf „Stopp“ stellen und den federbetriebenen Motor mithilfe des unter dem Chassis befindlichen Schlüssels aufziehen. Anschließend stellen Sie das Modell auf eine ebene Fläche, halten es mit einer Hand fest und betätigen „Start“. Jetzt können Sie das Modell loslassen und ihm nachschauen, wenn es davonfährt. Der Wagen verfügt über Vorwärts- und Rückwärtsgang und Leerlauf.
Wussten Sie, dass das Zeitalter der Massenproduktion von Autos auch die Ära massenhafter Autodiebstähle einläutete? Die offenen Kabinen waren nicht sicher abzuschließen, es war einfach, die Autos kurzuschließen, und es gab keine eindeutig identifizierbaren individuellen Kennzeichnungen oder Seriennummern. All dies machte die Fahrzeuge aus der Fließbandproduktion für Diebe zu attraktiven Zielen. Darüber hinaus boten die Autos den Dieben eine hervorragende Möglichkeit, Diebesgut zu transportieren oder nach einem Bankraub schnell zu fliehen. Während der Zeit der Prohibition (1920-33) in den USA waren in nicht wenigen Autos falsche Fahrgestelle eingebaut, um geschmuggelten Alkohol zu verbergen! So besteht tatsächlich ein Zusammenhang zwischen dem Ausbau und der Entwicklung des FBI und der Zunahme und Evolution massenproduzierter Automobile.

Das Retro-Auto UGR-T ist ein Holzmodell mit 337 Teilen mit dem Schwierigkeitsgrad „Hoch“, das Ihnen beim Zusammenbau mehr als 7 Stunden Spaß bereiten wird. Für den Zusammenbau dieses attraktiven Modelbausatzes aus Holz werden weder Klebstoff noch andere Werkzeuge benötigt — alles, was Sie brauchen, finden Sie in dem Kasten. Die einzelnen Teile sind mit Laser sorgfältig in Sperrholztafeln vorgeschnitten, aus denen sie sich leicht herausnehmen lassen, um sie dann zusammenzubauen. Eine detaillierte und illustrierte Anleitung in 11 Sprachen (Englisch, Deutsch, Spanisch, Französisch, Italienisch, Polnisch, Ukrainisch, Chinesisch, Japanisch, Koreanisch und Russisch) führt Sie durch den Zusammenbau und zu einem erfolgreichen Ergebnis. Sollte während des Zusammenbaus ein Teil brechen, teilen Sie uns das einfach mit. Wir senden Ihnen gerne ein kostenfreies Ersatzteil zu.
Frühe handgefertigte Autos gab es in vielen Farben (aber der schwarze Lack trocknete schneller)! Sie können Ihr Retro-Auto UGR-T in seinem attraktiven Naturholz-Zustand belassen, ihm mit Farben oder Holzbeizen Ihre ganz persönliche Farbgestaltung geben oder es schwarz lackieren.
Ihr Retro-Auto UGR-T ist der ideale Anlass, um Ihre Sammlung mit Fahrzeug-Holzmodellen von Ugears zu starten. Zu den Ugears-Modellen klassischer amerikanische Wagen und Lkw gehören der Lumberjack Pick-up, das Traum-Cabrio und der Cobra Drift. Und dann können Sie Ihre Sammlung um Motorräder, Züge, Schiffe und mechanische Wunder aller Art erweitern. Erforschen Sie einfach die wunderbare Welt der 3D-Puzzles, Modellbausätze, Roboter, Holzpuzzle-Kästchen und STEM-Lab Bausätze von Ugears.
Das Modell Retro-Auto UGR-T wird alle Fans historischer Wagen, Anhänger/innen des Fahrzeugmodellbaus und Liebhaber/innen guter 3D-Puzzles begeistern. Dieses DIY-Fahrzeugmodell ist ein großartiges Geschenk — zu Feiertagen, Geburtstagen oder einfach so, eine elegante Dekoration, die in jeden Raum passt, und es verspricht stundenlangen Spaß während Sie es zusammenbauen und beim Spielen Ihrer Phantasie freien Lauf lassen. Wir wünschen Ihnen eine schöne Zeit auf Ihrer Reise in die Vergangenheit mit dem Retro-Auto UGR-T!

4820184121508

Achtung! Kleinteile.
Let's go Retro! Fantastic 3D functional puzzle. Folding roof, it moves forward and reverse! Great model! Ugears models are the Best!
I am still working on it but am very happy with it .
Good quality and service
I had this box sitting on a shelf for over a year. Finally built it. My 8th project. Definitely very advanced. Loved every minute of the build. But something is wrong with the spring. I finally got it in correctly and the car won't move. Any suggestions would be appreciated.
Fantastic model, great fun but like some of the other builders I had trouble getting the gears to move easily even though I put plenty of wax on. Also I had an issue with the spring. Mine started to slip soon after I had finished it because there is a design fault with the way the centre pin doesn't lock the spring properly. I'm going to have to try to find a way to lock it. Alan
Buenos días UGEARS.me gusta mucho estoy esta maqueta gracias UGEARS a seguir así todo perfecto.
I published my second review recently, stating that the spring-loaded cars models did not propel as described. I had been hopeful for feedback. The moving parts were carefully waxed; I see no fault on my part.
Craig Simpson.
Like my review of the Rapid Mouse, not published, although I was even more careful in this build, this vehicle also did not perform is described ie the spring did not release to drive the wheels. I did have fun building it, but wonder where I am going wrong, if at all.
Love that car, and love building it. I also like the convertible top, very unique. Very very nice love it.
A thoroughly enjoyable build. The finished car looks cool and was an interesting and fair challenge to complete. It even has features they don’t mention like the lever to open the boot.( trunk for Americans!)
One plea Ugears! You are an excellent company, constantly innovating and developing despite all that is happening in the Ukraine. How come then, you are still using the yellow elastic bands? Here in Spain, they seldom last more than a few months before disintegrating , meaning difficult re- builds. Can you include something more substantial?
A minor gripe that doesn’t detract much from a five star kit
Reviews in Other Languages
Bonjour,
C'est la deuxième construction que je fais, et c'est toujours un vrai bonheur
- 5 stars: 13 (68%)
- 4 stars: 4 (21%)
- 3 stars: 1 (5%)
- 2 stars: 1 (5%)
- 1 star: 0 (0%)
Let's go Retro! Fantastic 3D functional puzzle. Folding roof, it moves forward and reverse! Great model! Ugears models are the Best!
I am still working on it but am very happy with it .
Good quality and service
I had this box sitting on a shelf for over a year. Finally built it. My 8th project. Definitely very advanced. Loved every minute of the build. But something is wrong with the spring. I finally got it in correctly and the car won't move. Any suggestions would be appreciated.
Bonjour,
C'est la deuxième construction que je fais, et c'est toujours un vrai bonheur
Fantastic model, great fun but like some of the other builders I had trouble getting the gears to move easily even though I put plenty of wax on. Also I had an issue with the spring. Mine started to slip soon after I had finished it because there is a design fault with the way the centre pin doesn't lock the spring properly. I'm going to have to try to find a way to lock it. Alan
Buenos días UGEARS.me gusta mucho estoy esta maqueta gracias UGEARS a seguir así todo perfecto.
I published my second review recently, stating that the spring-loaded cars models did not propel as described. I had been hopeful for feedback. The moving parts were carefully waxed; I see no fault on my part.
Craig Simpson.
Like my review of the Rapid Mouse, not published, although I was even more careful in this build, this vehicle also did not perform is described ie the spring did not release to drive the wheels. I did have fun building it, but wonder where I am going wrong, if at all.
Love that car, and love building it. I also like the convertible top, very unique. Very very nice love it.
A thoroughly enjoyable build. The finished car looks cool and was an interesting and fair challenge to complete. It even has features they don’t mention like the lever to open the boot.( trunk for Americans!)
One plea Ugears! You are an excellent company, constantly innovating and developing despite all that is happening in the Ukraine. How come then, you are still using the yellow elastic bands? Here in Spain, they seldom last more than a few months before disintegrating , meaning difficult re- builds. Can you include something more substantial?
A minor gripe that doesn’t detract much from a five star kit
Again I am blown away by this model. As my says “it is so cute”. I love the detail especially the fabric roof and how it will retract. Also the speed at which this model runs is much slower than my other models as it should be. Not sure if this is by design or not but it is perfect!!!!
Very beautiful model and looks great. But unfortunately even after having scrupulously assembled the car, it remains totally blocked, the spring relaxes jerkily and cannot move the car forward
In my opinion, one of the best retro car models in the Ugears line. A lot of mechanics, an interesting, realistic option for opening the roof, a crackling motor and much more. Review can be viewed on the channel Incredible Gears.
I have assembled several UGears cars and this may be the cutest one. It was nice to not have to use any toothpicks. My one criticism is the design of the axis for the spring. As designed it will not fit the shape of the center of the spring. I solved this problem by leaving off one curved pieces that forms the axis piece. This creates a flat area that fits the spring.
Having great difficulty in assembling spring as detailed on page 11 & 12 of the assembly instructions forRetro Car UGR-T
Is there a video showing assembly instructions as can be seen for other of your models on "YouTube" If the spring is an alternative to elastic bands, please revert to elastic bands for future models.
Await your response
Regards
David Greene
HELP
I purchase these for my 89 year old dad, who loves building these, this is his second build, the first was the UGM 11 truck, I have purchased the express train, there a lot of fun to build. Hats off to the engineer for his designs. I like the coil spring wind up better than the rubber bands, especially on the train. I can't wait to get one. Your customer service is awesome, I broke a part and there sending me a new.
Thank you again for hours of bonding with my dad and having fun building something so awesome.
I think this is my 18th build and one of my favorites.
I have the Sky Watcher table clock to build next and then the Dragster (am waiting on a part that I broke).
The spring assembly was a tad challenging but the Retro Car was a very fun build.
Hi just to let you no is I haven't yet started the model in question, all I have to say about your designs they are fantastic
Yours sincerely
Mr Jeffrey Foreman