Tricar UGR-S

3D puzzle Tricar UGR-S de Ugears recorre 4 metros en línea recta o, después de haber girado las ruedas, sale a realizar elegantes curvas. Sin pegamento. ¡El regalo perfecto!

Precio habitual 1.239,00 Kč
Precio habitual Precio de oferta 1.239,00 Kč
Impuesto incluido. Los gastos de envío se calculan en la pantalla de pago.
  • 457

    Piezas

  • 14+

    Edad

  • Advanced

    Nivel

  • Mecánico

    Modelo

  • Resorte de metal

    Tipo de accionamiento

  • 26.2 x 9 x 14 cm

    Dimensiones

Tricar UGR-S

¡Mónteme! ¡Vaya donde vaya, atraerá todas las miradas! 

El Tricar UGR-S es una genial maqueta más de la colección de motocicletas y automóviles de Ugears. Este elegante vehículo de dos plazas es la atracción de la carretera y con sus tres ruedas cautiva toda la atención. Dispone de un accionamiento por resorte, suspensión delantera y trasera, un volante que gira las ruedas delanteras hacia la derecha o izquierda, además de muchísimos detalles grandiosos como unos pistones móviles, grandes faros, unos tubos de escape especiales en un lado, una maleta para colocar en el portaequipajes lateral, así como grabados láser. Y esto no es todo — ¡levante los dos lados del capó para ver el depósito de gasolina y el motor de resorte!

El Tricar UGR-S de Ugears recorre aproximadamente 4 metros en línea recta o realiza elegantes curvas después de haber girado las ruedas mediante el volante o a mano. Coloque la palanca en posición "Park", inserte la llave en el capó, dele unas 15 vueltas, y después arranque su vehículo de tres ruedas moviendo la palanca al modo "Drive". Observe estos maravillosos pistones y la cadena de transmisión en acción, mientras su tricar parte en el sentido deseado. El Tricar UGR-S está desarrollado para que pueda empujarlo también de forma manual, sin arrancar el motor de resorte.

Características del Tricar UGR-S:

  • Propulsado por un motor de resorte 
  • Recorre hasta 4 metros
  • Palanca con los modos "Park" y "Drive"
  • Volante operativo 
  • Suspensión delantera y trasera 
  • Cadena de transmisión sin par que va hacia la rueda trasera — una novedad en el catálogo de Ugears
  • Portaequipajes en el lateral, con maleta

Características del coche DIY de madera:

  • Grabado láser para un diseño realista
  • Pistones, capó, etc. móviles
  • Montaje sin pegamento ni herramientas
  • Instrucciones detalladas en 11 idiomas
  • icon

    4820184121836

  • icon

    ¡Atención! Piezas pequeñas.

  • Precio habitual 1.239,00 Kč
    Precio habitual Precio de oferta 1.239,00 Kč

    Customer Reviews

    Based on 8 reviews
    88%
    (7)
    13%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    G.G.

    Good job UGEARS!! 🙏 This vehicle's assembly was a brilliant and surprising, specially the back chain. It's the most complex model I've ever built, with the highest number of pieces. After finishing, I had to remove the front wheels to polish the wood and apply wax so they'd roll smoothly. Attaching the spring was one of the most challenging tasks I've faced in my 10 wooden puzzles. I finally got the tricar to travel an incredible 5.30 meters 😎!!!. Can anyone beat that?😉G

    G
    Gergő

    Lovely vehicle, it looks so pretty on my shelf and building it was a blast.
    Unfortunately, I cannot say the same about its mechanism. Even if I wind it up all the way, it remains stuck and it needs a little extra push to release the spring. The front wheels also turned out to be too tight, they don’t roll on the floor at all, making it impossible for the car to move on its own. Not sure if I did something wrong, the rear wheel does not have this problem at all.
    But I bought this car primarily for decorative reasons (and to build it of course) and for that, it is perfect.

    W
    William (.C.

    I enjoyed building this model very much. The suspension is excellent and the motor in front makes the model. Very good instructions and no parts missing. The back wheel shows it off. Well done U-Gears.

    M
    Mike T.

    Each time I build one of these kits, the improvements are a real compliment to the design team. This kit has rack and pinion steering, real spring suspension, a spring drive and is chain driven.
    It proved a real challenge at times but that’s why I love Ugears- it needs care and thought but the rewards are well worth it.
    Minor gripe again- still the odd elastic band in places where it is difficult to replace when they degrade .

    S
    Stephanie

    Nice build. Some pieces can be tricky but as usual with you guys at ugears everything fit. I have built almost everything in your catalog. I have built other projects from other companies and no one is better than ugears. Instructions are on point! Very easy to follow. The models are fun to build. There is something for everyone. If you are starting out on these puzzles I urge you to buy ugears! Not because they are easy but because they explain it so well. Oh and did I mention they will replace parts. Big perk! Ugears, thank you for giving me something to do with my hands!

    I STAND WITH THE UKRAINE!

    D
    Dmitriy

    I love this car. Review on the Incredible Gears channel

    Reviews in Other Languages

    R
    Rémy

    La construction de ce modèle est assez complexe, mais le résultat final en vaut la peine donc c'est super

    J
    Javier j.

    Fantástico y precio y me ha llegado rápido gracias UGEARS.