UGR-S à trois roues

3D puzzle UGR-S à trois roues Ugears peut parcourir environ 4 mètres en ligne droite, ou faire tourner ses roues pour des virages gracieux. Le cadeau parfait !

Prix habituel 1.239,00 Kč
Prix habituel Prix soldé 1.239,00 Kč
Taxes incluses. Frais d'expédition calculés à l'étape de paiement.
  • 457

    Pièces

  • 14+

    Âge

  • Advanced

    Niveau

  • Mécanique

    Modèle

  • Ressort métallique

    Type d'entraînement

  • 26.2 x 9 x 14 cm

    Dimensions

UGR-S à trois roues

Assemblez-moi. Faites tourner les têtes partout où vous allez !

Le UGR-S à trois roues est un ajout sympa à la collection de motos et d'automobiles de chez Ugears. Ce biplace élégant est un véhicule à trois roues qui retient l'attention avec un moteur à ressort, une suspension avant et arrière, un volant fonctionnel qui fait tourner les roues avant à gauche et à droite, et de nombreux détails tels que des pistons mobiles, de gros phares, des tuyaux d'échappement personnalisés sur le côté, une valise à placer dans le porte-bagages latéral et des gravures au laser. Et ce n'est pas tout : soulevez les deux côtés du capot moteur pour voir le réservoir d'essence et le moteur à ressort !

Le UGR-S à trois roues Ugears peut parcourir environ 4 mètres en ligne droite, ou tourner les roues à l'aide du volant ou à la main pour des virages gracieux. Placez le levier de vitesse en mode " Park ", insérez la clé dans le capot, faites jusqu'à 15 tours, puis démarrez le véhicule en plaçant le levier de vitesse en mode « Drive ». Observez ces magnifiques pistons et chaînes en action tandis que le tricycle se met en route dans la direction souhaitée. Le UGR-S  à trois roues est conçu pour que vous puissiez le pousser à la main, sans avoir à enclencher le moteur à ressort.

Caractéristiques du UGR-S à trois roues :

  • Entraîné par un moteur à ressort 
  • Peut parcourir jusqu’à 4 mètres
  • Levier de vitesse avec modes « Park » et « Drive »
  • Volant fonctionnel 
  • Suspension avant et arrière 
  • Entraînement unique par chaîne sur la roue arrière, une première dans le catalogue Ugears
  • Compartiment à bagages latéral avec valise

Caractéristiques de la voiture en bois à monter soi-même :

  • Gravure au laser pour un aspect réaliste
  • Pistons mobiles, capot de moteur, etc.
  • Assemblage sans colle ni outils
  • Instructions étape par étape en 11 langues 
  • icon

    4820184121836

  • icon

    Attention ! Petites pièces.

  • Prix habituel 1.239,00 Kč
    Prix habituel Prix soldé 1.239,00 Kč

    Customer Reviews

    Based on 8 reviews
    88%
    (7)
    13%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    G.G.

    Good job UGEARS!! 🙏 This vehicle's assembly was a brilliant and surprising, specially the back chain. It's the most complex model I've ever built, with the highest number of pieces. After finishing, I had to remove the front wheels to polish the wood and apply wax so they'd roll smoothly. Attaching the spring was one of the most challenging tasks I've faced in my 10 wooden puzzles. I finally got the tricar to travel an incredible 5.30 meters 😎!!!. Can anyone beat that?😉G

    G
    Gergő

    Lovely vehicle, it looks so pretty on my shelf and building it was a blast.
    Unfortunately, I cannot say the same about its mechanism. Even if I wind it up all the way, it remains stuck and it needs a little extra push to release the spring. The front wheels also turned out to be too tight, they don’t roll on the floor at all, making it impossible for the car to move on its own. Not sure if I did something wrong, the rear wheel does not have this problem at all.
    But I bought this car primarily for decorative reasons (and to build it of course) and for that, it is perfect.

    W
    William (.C.

    I enjoyed building this model very much. The suspension is excellent and the motor in front makes the model. Very good instructions and no parts missing. The back wheel shows it off. Well done U-Gears.

    M
    Mike T.

    Each time I build one of these kits, the improvements are a real compliment to the design team. This kit has rack and pinion steering, real spring suspension, a spring drive and is chain driven.
    It proved a real challenge at times but that’s why I love Ugears- it needs care and thought but the rewards are well worth it.
    Minor gripe again- still the odd elastic band in places where it is difficult to replace when they degrade .

    S
    Stephanie

    Nice build. Some pieces can be tricky but as usual with you guys at ugears everything fit. I have built almost everything in your catalog. I have built other projects from other companies and no one is better than ugears. Instructions are on point! Very easy to follow. The models are fun to build. There is something for everyone. If you are starting out on these puzzles I urge you to buy ugears! Not because they are easy but because they explain it so well. Oh and did I mention they will replace parts. Big perk! Ugears, thank you for giving me something to do with my hands!

    I STAND WITH THE UKRAINE!

    D
    Dmitriy

    I love this car. Review on the Incredible Gears channel

    Reviews in Other Languages

    R
    Rémy

    La construction de ce modèle est assez complexe, mais le résultat final en vaut la peine donc c'est super

    J
    Javier j.

    Fantástico y precio y me ha llegado rápido gracias UGEARS.