Pour la 7eme construction, j'avoue que j'ai beaucoup transpiré, mais avec patience et persévérance le résultat est magnifique
It may be an unfair rating at this time, as I am still working on it. I am on the verge of losing patience because of the difficulty of installing the rubber bands. Getting the thick bands into the tiny slots, especially when the slot already has a band in it, is extremely difficult, to say the least. Very time consuming to get past this step. I have built other Ugear models, none have caused me anywhere near the difficulty of just this one step. I will review again when I have finished assembly (I hope I get it done!)
Administrator
Hi Bill,
Thank you for your feedback.
If you need help with the assembling, please contact our Customer Service Department at customerservice@ugearsmodels.com. They will get back to you within 48 hours with help in your question.
Best regards,
The Ugears Team
I just finished this model. It was a real challenge to put this one together. The rubber band assemblies were the most challenging. Trying to get the thicker bands through the holes and all the same length was very difficult. I had to use all of the available spare parts because I kept breaking the parts. But i finally got it. Other than that this model is fantastic. It runs great!!! Make sure you use plenty of wax on the moving parts. I love these Ugears models. The problem is which one should I do next. You guys are great. I love these models. Please keep up the good work.
I really enjoyed putting this together. This was my first try at Ugears and I did break a couple parts that I was able to replace with a spare part except for one I was able to glue. If I didn’t show you you wouldn’t know. My only problem I can’t make it run. I guess a gear is not lined up and I am not going to take it apart to see. I will build another model and be more careful. I do think it is important to take your time building these. I was very impressed with how precise the parts fit together.
My my first ugear model and not my last one! Quality is fantastic and instructions are quite clear. I only made a couple of mistakes but I could resolve them. There are some spare parts but I didn’t need to use any of them.
It cost me 10h of work approx. It is recommended to use wax properly if you want your car to move, else there are too many friction. I had to put wax at the very end on the gears as if it was oil in a car. Quite funny.
Only one comment, I don’t understand the purpose of the wheel with rubber on the left side, plus it is the only part that doesn’t hold well and I had to put some glue there.
Only had this model 10 months and the exposed rubber bands have rotted already.very disappointed.
Administrator
Hi Keith,
Thank you for your feedback.
Please fill out the form for spare and replacement parts on our website - https://ugearsmodels.com/request-for-additional-parts.html.
We will send the parts at our expense.
Best regards,
The Ugears Team
Puhh, algus oli raske aga peale kapotialuse valmissaamist läks kõik libedalt
Fun to build, clever technically, looks sensational when finished.
Well done.
Absolutely fascinating to assemble it. The manual instructions it is powerful and very clear. It was a pleasure and relaxing to see this beautiful wooden machine growing up and the movies parts work all together!! Thank you and Stay safe!!
I am so proud of this model.
It is so beautiful!
Thank you for your production!
I also bought the "antique box" and the "butterfly": masterpieces!
The GP car proved to be an excellent and enjoyable model. The laser cut parts are very precise and they fit together well. The instruction manual is also excellent with clear concise diagrams and assembly tips. Construction of the rubber motors is challenging but achievable. The variable quality of the supplied cocktail sticks (that are needed throughout the assembly) means fit is too loose in many cases. I overcame this by using general purpose glue where necessary. Otherwise a brilliant model.
Gerade fertig geworden mit dem U 9 Grand Prix Car. Und ich habe das Bedürfnis Eurem Team ein dickes Lob und Danke zu schreiben. Ich war beeindruckt, wie präzise alles gecutted war und wie gut alles zusammen gepasst hat. Man merkt, dass da Menschen mit Leidenschaft am Werk sind. Die Bedienungsanleitung ist so ziemlich die Beste, die ich je gesehen habe. Da kann sich ein grosses Möbelhaus aus Schweden einiges abgucken :-)
Das I-Tüpfelchen: die Motor Service Teile! Genial durchdacht.
Toll, jetzt suche ich mein nächstes Modell aus. Bin gespannt auf die nächste Herausforderung.
A great model. Maybe I should have started with an easier design and worked up to this one. But I got there in the end. Pistons and inlet and exhaust valves all worked. Engine bands were a challenge, but are possible. I will sand and wax parts better on my next one as once finished it doesn’t work as well as it could. My error. Fun to assemble and finished model looks great. Only negative: after a few months all the elastic bands have rotted. Once removed, model still looks great. Definitely an excellent product.
Just finished my first ugears model. The Grand Prix Car is probably a bit ambitious for the first experience but I finally managed to assemble it and it did work and looks fantastic!
I'm very impressed by the precise cutting of the wood plates and the fantastic user manual.
The only thing I need to improve for the next model is the cutting of the toothpicks: I probably need to buy a better knife...
Ukraine seems to be a very good place for for innovative ideas and arts (one of my favorite bands is also from there: Jinjer).
Congratulation to the whole team and please continue to create such precious "toys".
Kind regards from Switzerland
Stefan
Administrator
Hello Stefan,
thank you for so inspiring words! Design and technical design in particular is one of the four key strengths of Ukraine (along with agriculture, IT and metallurgy industry)
Very very impressed. Instruction manual is clear, beautifully illustrated and straightforward to follow. All the parts were very precisely cut and fitted together easily, which I was surprised at, given similar kits in my experience need a bit of fettling to fit properly. Engine in particular has clearly benefitted from a lot of engineering thought, even down to different size inlet and exhaust ports, and is a real pleasure to see all the moving parts working together. In my experience the build time stated on the website is a bit optimistic, but the enjoyment is all in the build. Don't rush, pay very careful attention to all the illustrations in the build manual and enjoy. Am now building the Heavy Boy Truck!
Administrator
Hi Jonathan,
thank you for sharing your experience. The U-9 Grand Prix needs some time but it's pleasure to watch its move and appearance after!
Stay safe and have a nice day,
Ugears Team
La verdad es que me ha sorprendido la calidad del producto, es muy buena. También me gusta mucho el diseño del motor. Pero a pesar de haberlo montado con mucho cariño, el rozamiento del mecanismo es demasiado grande para que el coche se mueva por sí solo.
I got this kit as a birthday present. Very clever design. Clearly designed by someone who enjoys their work. After abit of running in everything runs well.
Administrator
Hi Tor,
thank you! Yes after asssembly, to get the smooth movement , some test-drives are needed to operate the mechanism to seat the parts in their positions.
Have a nice day,
Ugears Team
Das Modell ist eine wirkliche Herausforderung. Ab und an trieb mich der Zusammenbau an den Rand der Verzweiflung da man nur zwei Hände hat und gefühlt vier Hände brauchen könnte. Aber am Ende war alles gut und es ist ein wunderschönes Modell entstanden welches zu dem auch einwandfrei funktioniert. Das Highlight finde ich ist der Motor mit funktionierenden Kolben und Ventilen sowie die Kurbel zum Aufziehen. Spitze macht weiter so.
Administrator
Hallo,
Herzlichen Glückwunsch zum U-9 Grand Prix Car. Dies ist ein ziemlich herausforderndes Modell und interessant in der Montage
This model has a great finished product and is really fun to build!
Administrator
Thank you Thayer Ask! That's great!
It was a great model its chalengin but still ease to build .It was the first model I buld and i loved it. the car had awesome features. and I will buy more Models in the futur.
Administrator
Dear Josh,
thanks a lot for your amazing words adnd for sharing this exciting hobby!
I really loved this model. Nicely done ans fine result
Administrator
Dear Thibaut,
thank you for sharing your feelings. Our congratulations on the completed U-9 Grand Prix Car!
Have a great year!
The Grand Prix car is a wonderful kit. I have a lot of fun during assembling. Unfortunately, there are three things with needs improvement. 1)The ON/Off switch has wooden splice bar with a too strong spring action. If the splice bar arrested in the OFF position, it is not possible to move the switch into the ON position. I Think the splice bar is not necessary, because the friction on the ON/OFF switch itself is great enough to avoid any misleading movement.
2)The connection between front wheel a wheel shaft is very simple. I think, with a wheel shaft adapter there will be a better fit.
3) The rubber engine should be built with two rubber strings, I did my best, but for me it was impossible to put the two-rubber string in these tiny gaps at ground plate. A little more space or a bigger gap angle would be helpful at this step of assembling.
Administrator
Hi Ernst,
thank you for sharing your experience. We improve our models constantly and will discuss with our team your recommendations
Супер! Дуже цікаво. І неймовірне задоволення від точності і продуманості!
Administrator
Сергію, доброго дня,
дякуємо за теплі слова. Раді, что ви отримали задовлення від складання
It is very wonderful so I will review it in Japanese.
男なら大好きなデザインかと思います。
エンジンもピストン、バルブなどまで再現されており、とにかくかっこいいです☆
完成して眺めながらとても満足しています(*^_^*)
Administrator
Dear Tatsuya,
thank you a lot for your feedback. And pass on warm greetings from Kyiv, Ukraine from all Ugears team!
-270x270.jpg)
